View L2K2-MW14-11-BT00_4148718.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Datasheet DS51
power light source
LUXEON K2
(R)
Introduction
LUXEON(R) K2 is the most robust and powerful LED available. With unprecedented thermal, drive current and light output capabilities, it offers the lighting industry leading lumens per package and the opportunity to create never before possible lighting solutions. LUXEON K2 is available in all colors including cool white, neutral white, warm white, blue, royal blue, green, cyan, red orange, red and amber. deliver more useable light optimize applications to reduce size and cost engineer more robust applications reduce thermal management engineering utilize standard FR4 PCB technology in addition to MCPCB solutions simplify manufacturing through the use of surface mount technology.
Highest operating junction temperature available, 185C Industry leading lumen perform ance, > 140--175 lumens in 6500K white Highest Drive Currents--1500 mA Lowest Thermal Resistance-- 9C/W Industry Best Moisture Sensitivity level--JEDEC 2a 4 week floor life without recondi tioning Lead free reflow solder JEDEC 020c compatible RoHS Compliant Autoclave compliant-- JESD22 A 102 Industry Best Lumen Maintenance--50,000 hours life at 1000 mA with 70% lumen maintenance
LUXEON K2 Technology Leadership
Table of Contents
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Flux Characteristics for LUXEON K2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Flux Characteristics for LUXEON K2 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Mechanical Dimensions--SMT 4-Lead Gullwing Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Solder Pad Layout--SMT Lead Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Mechanical Dimensions--2-Lead Gullwing Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Solder Pad Design--2-Lead Gullwing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Solder Pad Layout--2-Lead Gullwing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Pin Out Diagram--Gullwing Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Mechanical Dimensions--LUXEON K2 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Typical Light Output Characteristics Over Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Typical Relative Luminous Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 White Binning Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 LUXEON K2 Cool-White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 LUXEON K2 Neutral-White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 LUXEON K2 Warm-White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
LUXEON K2 Datasheet DS51 (7/07)
2
Product Nomenclature
The LUXEON K2 is available in two configurations, one tested and binned at 350 mA and a second tested and binned at 1000 mA. Due to production distribution and variance it is difficult to accurately correlate product performance across a broad drive current range. This is one of the reasons Philips Lumileds has elected to offer multiple test current options of the LUXEON K2 to better service our customers. The part number designation is explained as follows: L X K 2 A B C D E F G for LUXEON K2 Emitter L 2 K 2 A B C D E F G H for LUXEON K2 Star Where: A -- designates radiation pattern (value P for Lambertian) B -- designates color (see Philips Lumileds AB21) C -- designates color variant (1 for direct colors and Cool White, N for Neutral White, and W for Warm White D -- designates test current (value 2 for 350 mA, value 4 for 1000 mA) E -- designates minimum flux bin for LUXEON K2 Emitter (see Philips Lumileds AB21) F -- designates minimum flux bin for LUXEON K2 Star product (see Philips Lumileds AB21), Reserved for future product offer ings in LUXEON K2 Emitter G and H -- Reserved for future product offerings.
Products tested and binned at 350 mA follow the part numbering scheme: L X K 2 x x x 2 x x x (L2K2 xxx2 11 Bxxx for LUXEON K2 Star) For these products typical performance is also listed for 700 mA operation.
Products tested and binned at 1000 mA follow the part numbering scheme: L X K 2 x x x 4 x x x (L2K2 xxx4 11 Bxxx for LUNXEON K2 Star) For these products typical performance is also listed for 1500 mA operation.
Both versions of this product are capable of operation over the entire drive current range, up to 1500 mA for cool white, neutral white, warm white, green, cyan, blue and royal blue and up to 700 mA for red, red orange and amber. In addition, multiple minimum performance levels of both products are available. Digit "E" (Digit "F" for K2 Star Product) in the part numbering scheme above, specifying the minimum performance flux bin, designates the performance option.
Average Lumen Maintenance Characteristics
Lifetime for solid state lighting devices (LEDs) is typically defined in terms of lumen maintenance--the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that white LUXEON K2 products will deliver, on average, 70% lumen maintenance at 50,000 hours of operation at a forward current of 1000 mA. This projection is based on constant current operation with junction temperature maintained at or below 120C. Philips Lumileds projects that green, blue, cyan and royal blue LUXEON K2 products will deliver, on average, 70% lumen maintenance at 50,000 hours of operation at a forward current of 1000 mA. This projection is based on constant current operation with junction temperature maintained at or below 150C. Philips Lumileds projects that red, red orange and amber LUXEON K2 products will deliver, on average, 70% lumen maintenance at 50,000 hours of operation at a forward current of 350 mA. This projection is based on constant current operation with junction temperature maintained at or below 120C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance.
LUXEON K2 Datasheet DS51 (7/07) 3
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid state lighting market. The LUXEON K2 is compliant to the European Union directives on the Restriction of Hazardous Substances in electronic equipment, namely the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON K2: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
LUXEON K2 Datasheet DS51 (7/07)
4
Flux Characteristics for LUXEON K2 Junction Temperature, TJ = 25C
Table 1.
Performance at Test Currents Minimum Luminous Flux (lm) or Radiometric Power (mW) V [1] [3]
39.8 51.7 80 87.4 113.6
Typical Performance at Indicated Current Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
75 100 110 130 140
Color
Part Number
LXK2 LXK2 LXK2 LXK2 LXK2 PW12 PW12 PW14 PW14 PW14 R00 S00 T00 U00 V00
Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
45 60 85 100 120
Test Current (mA)
350 350 1000 1000 1000
Drive Current (mA)
700 700 1500 1500 1500
Cool White
Neutral White
LXK2 PWN2 Q00 LXK2 PWN2 R00 LXK2 PWN2 S00 LXK2 PWN4 T00 LXK2 PWN4 U00 LXK2 PWN4 V00
30.6 39.8 51.7 67.2 87.4 113.6
35 45 60 80 100 120
350 350 350 1000 1000 1000
60 75 100 105 130 140
700 700 700 1500 1500 1500
Warm White
LXK2 PWW2 Q00 LXK2 PWW2 R00 LXK2 PWW4 T00 LXK2 PWW4 U00
30.6 39.8 67.2 87.4
35 45 80 100
350 350 1000 1000
60 75 105 130
700 700 1500 1500
Green
LXK2 PM12 R00 LXK2 PM12 S00 LXK2 PM14 U00 LXK2 PE12 Q00 LXK2 PE12 R00 LXK2 PE12 S00 LXK2 PE14 T00 LXK2 PE14 U00 LXK2 PB12 K00 LXK2 PB12 L00 LXK2 PB12 M00 LXK2 PB14 N00 LXK2 PB14 P00 LXK2 PB14 Q00 LXK2 PR12 L00 LXK2 PR12 M00 LXK2 PR14 Q00 LXK2 PR14 R00
39.8 51.7 87.4 30.6 39.8 51.7 67.2 87.4 8.2 10.7 13.9 18.1 23.5 30.6 175 225 435 515 mW mW mW mW
45 60 100 35 45 60 80 100 9.5 12.5 16 21 27 35 200 290 475 575 mW mW mW mW
350 350 1000 350 350 350 1000 1000 350 350 350 1000 1000 1000 350 350 1000 1000
75 100 130 60 75 100 105 130 16 21 27 35 35 46 330 480 620 750 mW mW mW mW
700 700 1500 700 700 700 1500 1500 700 700 700 1500 1500 1500 700 700 1500 1500
Cyan
Blue
Royal Blue
LUXEON K2 Datasheet DS51 (7/07)
5
Flux Characteristics for LUXEON K2, Continued Junction Temperature, TJ = 25C
Table 1 Continued .
Performance at Test Currents Minimum Luminous Flux (lm) or Radiometric Power (mW) V [1] [3]
30.6 39.8 51.7 39.8 51.7 23.5 30.6 39.8
Typical Performance at Indicated Current Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
60 75 100 75 100 46 60 75
Color
Part Number
LXK2 PD12 Q00 LXK2 PD12 R00 LXK2 PD12 S00 LXK2 PH12 R00 LXK2 PH12 S00 LXK2 PL12 P00 LXK2 PL12 Q00 LXK2 PL12 R00
Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
35 45 60 45 60 27 35 45
Test Current (mA)
350 350 350 350 350 350 350 350
Drive Current (mA)
700 700 700 700 700 700 700 700
Red
Red Orange
Amber
Flux Characteristics for LUXEON K2 Star, Junction Temperature, TJ = 25C
Table 2.
Performance at Test Currents Minimum Luminous Flux (lm) or Radiometric Power (mW) V [1] [3]
BR00 BS00 BT00 BU00 BV00 39.8 51.7 80 87.4 113.6 30.6 39.8 51.7 67.2 87.4 113.6 30.6 39.8 67.2 87.4
Typical Performance at Indicated Current Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
75 100 110 130 140 60 75 100 105 130 140 60 75 105 130
Color
L2K2 L2K2 L2K2 L2K2 L2K2
Flux Bin
MW12 MW12 MW14 MW14 MW14 11 11 11 11 11
Typical Luminous Flux (lm) or Radiometric Power (mW) V [2] [3]
45 60 85 100 120 35 45 60 80 100 120 35 45 80 100
Test Current (mA)
350 350 1000 1000 1000 350 350 350 1000 1000 1000 350 350 1000 1000
Drive Current (mA)
700 700 1500 1500 1500 700 700 700 1500 1500 1500 700 700 1500 1500
Cool White
Neutral White
L2K2 MWN2 11 BQ00 L2K2 MWN2 11 BR00 L2K2 MWN2 11 BS00 L2K2 MWN4 11 BT00 L2K2 MWN4 11 BU00 L2K2 MWN4 11 BV00 L2K2 MWW2 11 BQ00 L2K2 MWW2 11 BR00 L2K2 MWW4 11 BT00 L2K2 MWW4 11 BU00
Warm White
Notes for Table 1 and Table 2: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of 10% on flux and power measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON K2 products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information. 4. Radiation Pattern for all LUXEON K2 Star products is Lambertian.
LUXEON K2 Datasheet DS51 (7/07)
6
Optical Characteristics LUXEON K2 at Test Current[1] Junction Temperature, TJ = 25C
Table 3.
Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue[3] Red Red Orange Amber Notes for Table 3:
Dominant Wavelength [2] D, Peak Wavelength [3] P, or Color Temperature [4] CCT Min. Typ. Max. 4500 K 3500K 2650K 520 nm 490 nm 460 nm 440 nm 620.5 nm 613.5 nm 584.5 nm 6500 K 4100K 3000K 530 nm 505 nm 470 nm 455 nm 627 nm 617 nm 590 nm 10000 K 4500K 3500K 550 nm 520 nm 490 nm 460 nm 645 nm 620.5 nm 597 nm
Typical Spectral Half width (nm) 1/2
[6]
Typical Temperature Coefficient of Dominant Wavelength (nm/oC) D/ TJ
Typical Total Included Angle [7] (degrees) 0.90V 160 160 160
Typical Viewing Angle [8] (degrees) 2 1/2 140 140 140 140 140 140 140 140 140 140
35 30 25 20 20 20 14
0.04 0.04 0.04 0.04 0.05 0.06 0.09
160 160 160 160 160 160 160
Test current is 350 mA for all LXK2 xxx2 xxx (L2K2 xxx2 11 xxxx for K2 Star) products, and 1000 mA for all LXK2 xxx4 xxx products (L2K2 xxx4 11 xxxx for K2 Star). 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of 0.5 nm for dominant wavelength measurements. 3. Royal blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. Philips Lumileds maintains a tolerance of 2nm for peak wavelength measurements. 4. CCT 5% tester tolerance 5. Typical CRI (Color Rendering Index) for Cool White product is 70, Neutral White is 75, and Warm White is 80. 6. Spectral width at 1/2 of the peak intensity. 7. Total angle at which 90% of total luminous flux is captured. 8. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 9. All white, green, cyan, blue and royal blue products are built with Indium Gallium Nitride (InGaN). 10. All red, red orange and amber products are built with Aluminum Indium Gallium Phosphide (AlInGaP). 11. Blue and royal blue power light sources represented here are IEC825 class 2 for eye safety.
1.
LUXEON K2 Datasheet DS51 (7/07)
7
Electrical Characteristics Electrical Characteristics at 350mA Part Numbers LXK2 xxx2 xxx, Junction Temperature, TJ = 25C
Table 4.
Color Cool White[4] Neutral White Green Cyan
[4] [4]
Forward Voltage Vf [1] (V) Min. Typ. Max. 2.79 2.79 2.79 2.79 2.79 2.79
[4]
Typical Dynamic Resistance () RD 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.4 2.4 2.4
[2]
Typical Temperature Coefficient of Forward Voltage [3] (mV/oC) VF / TJ 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Typical Thermal Resistance Junction to Case (oC/W) RJ C 9 (13 for Star) 9 (13 for Star) 9 (13 for Star) 9 9 9 9 12 12 12
3.42 3.42 3.42 3.42 3.42 3.42 3.42 2.95 2.95 2.95
4.23 4.23 4.23 4.23 4.23 4.23 4.23 3.51 3.51 3.51
Warm White[4]
[4]
Blue[4] Royal Blue Red Red Orange Amber
2.79 2.31 2.31 2.31
Notes for Table 4: 1. Philips Lumileds maintains a tolerance of 0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 14 and 15. 3. Measured between 25C = TJ = 110C at If = 350 mA. 4. The forward voltage of the LUXEON K2 LED will reduce by up to 0.30V at 350mA during the first few hours of operation after SMT reflow. Due to this effect, Philips Lumileds recommends current source drive for consistent and reliable perform ance. Cross connected series/parallel arrays or voltage drivers which could result in current hogging or variation in drive current are not recommended. Please consult your Philips Lumileds authorized distributor or Philips Lumileds Sales Representative for further information.
LUXEON K2 Datasheet DS51 (7/07)
8
Typical Electrical Characteristics at 700mA Part Numbers LXK2 xxx2 xxx, Junction Temperature, TJ = 25C
Table 5.
Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue Red Red Orange Amber
Typical Forward Voltage Vf [1] (V) 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60
Notes for Table 5: 1. Philips Lumileds maintains a tolerance of +/ 0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 14 and 15. 3 Measured between 25C = TJ = 110C at If = 700 mA.
LUXEON K2 Datasheet DS51 (7/07)
9
Electrical Characteristics at 1000mA Part Numbers LXK2 xxx4 xxx, Junction Temperature, TJ = 25C
Table 6.
Color Cool White[4] Neutral White Warm White Green[4] Cyan Blue
[4] [4] [4] [4] [4]
Forward Voltage Vf [1] (V) Min. Typ. Max. 3.03 3.03 3.03 3.03 3.03 3.03 3.03 3.72 3.72 3.72 3.72 3.72 3.72 3.72 4.95 4.95 4.95 4.95 4.95 4.95 4.95
Typical Dynamic Resistance () RD 0.6 0.6 0.6 0.6 0.6 0.6 0.6
[2]
Typical Temperature Coefficient of Forward Voltage [3] (mV/oC) VF / TJ 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Typical Thermal Resistance Junction to Case (oC/W) RJ C 9 (13 for Star) 9 (13 for Star) 9 (13 for Star) 9 9 9 9
Royal Blue
Notes for Table 6: 1. Philips Lumileds maintains a tolerance of 0.06V on forward voltage measurements 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figure 14. 3. Measured between 25C = TJ = 110C at If = 1000 mA. 4. The forward voltage of the LUXEON K2 LED will reduce by up to 0.50V at 1000mA during the first few hours of operation after SMT reflow. Due to this effect, Philips Lumileds recommends current source drive for consistent and reliable perform ance. Cross connected series/parallel arrays or voltage drivers which could result in current hogging or variation in drive current are not recommended. Please consult your Philips Lumileds authorized distributor or Philips Lumileds Sales Representative for further information.
Typical Electrical Characteristics at 1500mA Part Numbers LXK2 xxx4 xxx, Junction Temperature, TJ = 25C
Table 7.
Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue
Typical Forward Voltage Vf [1] (V) 3.85 3.85 3.85 3.85 3.85 3.85 3.85
Notes for Table 7: 1. Philips Lumileds maintains a tolerance of +/ 0.06V on forward voltage measurements.
LUXEON K2 Datasheet DS51 (7/07)
10
Absolute Maximum Ratings
Table 8.
Parameter DC Forward Current (mA) Peak Pulsed Forward Current (mA) Average Forward Current (mA) ESD Sensitivity LED Junction Temperature Max Case Temperature Storage Temperature K2 Star Aluminum Core PCB Temperature Soldering Temperature Allowable Reflow Cycles Autoclave Conditions Reverse Voltage (Vr)
Cool White/Neutral White/ Warm White Value 1500 1500 1500 2,000 V HBM Class 2 JESD22 A114 B 150C 135C 40C 185C 105C JEDEC 020c 260C 3 121C at 2 ATM, 100% RH for 72 hours max See Note 2
Green/Cyan Blue/Royal Blue Value 1500 1500 1500 2,000 V HBM Class 2 JESD22 A114 B 185C 170C 40C 185C N/A JEDEC 020c 260C 3 121C at 2 ATM, 100% RH for 72 hours max See Note 2
Red/Red Orange /Amber Value 700 700 700 2,000 V HBM Class 2 JESD22 A114 B 150C 135C 40C 185C N/A JEDEC 020c 260C 3 121C at 2 ATM, 100% RH for 72 hours max See Note 2
Notes for Table 8: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LEDs are not designed to be driven in reverse bias. 3. Stresses in excess of the absolute maximum ratings can cause damage to the emitter. Maximum Rating limits apply to each parameter in isolation, all parameters having values within the Current Derating Curve. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Exposures to the absolute maximum ratings for extended periods can adversely affect device reliability. See Current Derating Curves in this document for more details.
LUXEON K2 Datasheet DS51 (7/07)
11
JEDEC Moisture Sensitivity
Table 9.
Soak Requirements Level Time 2a 4 weeks Floor Life Conditions 30C / 60% RH Standard Time Conditions (hours) 696 [1] + 5/ 0 30C / 60% RH Accelerated Environment Time Conditions (hours) 120 +1/ 0 60C / 60% RH
Notes for Table 9: 1. The standard soak time includes a default value of 24 hours for semiconductor manufacturer's exposure time (MET) between bake and bag and includes the maximum time allowed out of the bag at the distributor's facility.
Reflow Soldering Characteristics
JEDEC 020c
Table 10.
Profile Feature Average Ramp Up Rate (Tsmax to Tp) Preheat Temperature Min (Tsmin) Preheat Temperature Max (Tsmax) Preheat Time (tsmin to tsmax) Temperature (TL) Time Maintained Above Temperature (TL) Peak / Classification Temperature (TP) Time Within 5C of Actual Peak Temperature (TP) Ramp Down Rate Time 25C to Peak Temperature
Lead Free Assembly 3C / second max 150C 200C 60 180 seconds 217C 60 150 seconds 260C 20 40 seconds 6C / second max 8 minutes max
Notes for Table 10: 1. All temperatures refer to topside of the package, measured on the package body surface.
LUXEON K2 Datasheet DS51 (7/07) 12
Mechanical Dimensions--SMT 4 Lead Gullwing Form
Figure 1. 4 lead Gullwing Package Outline Drawing.
Notes for Figure 1: 1. The anode side of the device is denoted by the chamfer on the part body. Electrical insulation between the case and the board is required--slug of the device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Do not handle the device by the lens except as described in Philips Lumileds document AB29. 3. Drawings not to scale. 4. All dimensions are in millimeters. 5. All dimensions without tolerances are for reference only. 6. Recommended solder paste thickness of 0.15mm.
LUXEON K2 Datasheet DS51 (7/07)
13
Solder Pad Design--SMT Lead Form
Conductive Pad
Conductive Pad
Conductive Pad
Soldermask Package Outline
Figure 2. 4 Lead Gullwing Solder Pad Design.
Notes for Figure 2: 1. Electrical isolation is required between signal leads and hexagonal heat slug contact. 2. For optimal thermal performance, maximize board metallization at hexagonal heat slug contact.
Solder Pad Layout--SMT Lead Form
Figure 3. 4 Lead Gullwing Package Solder Pad Layout.
Pin Out Diagram
Figure 4. 4 Lead Gullwing Pin Out Diagram.
LUXEON K2 Datasheet DS51 (7/07)
14
Mechanical Dimensions--2 Lead Gullwing Form[8]
Figure 5. 2 Lead Gullwing Package Outline Drawing.
Notes for Figure 5: 1. The anode side of the device is denoted by the chamfer on the part body. Electrical insulation between the case and the board is required--slug of the device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Do not handle the device by the lens except as described in Philips Lumileds document AB29--care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 3. Drawings not to scale. 4. All dimensions are in millimeters. 5. All dimensions without tolerances are for reference only. 6. Recommended solder paste thickness of 0.15mm. 7. Available as a custom part number, contact your local Future Lumileds representative for more information. 8. The 2 Lead Gullwing part is not recommended for use in solder re flow systems. Mount these parts with a thermal adhesive and hot bar soldering. For conventional reflow surface mounting, use 4 Lead Gullwing Form.
LUXEON K2 Datasheet DS51 (7/07) 15
Solder Pad Design--2 Lead Gullwing
Figure 6. 2 Lead Gullwing Package Solder Pad Layout.
Notes for Figure 6: 1. Electrical isolation is required between signal leads and hexagonal heat slug contact. 2. For optimal thermal performance, maximize board metallization at hexagonal heat slug contact.
Solder Pad Layout--2 Lead Gullwing
Figure 7. Solder Pad Layout 2 Lead Gullwing.
Pin Out Diagram--Gullwing Form
PIN 1 2 3 4
FUNCTION NC (TRIMMED) ANODE NC (TRIMMED) CATHODE
Figure 8. 2 Lead Gullwing Pin Out Diagram. LUXEON K2 Datasheet DS51 (7/07) 16
Mechanical Dimensions--LUXEON K2 Star
LABEL CATCODE SERIAL NUMBER DATECODE PART NUMBER
FORMAT FLUX. COLOR. VF BIN SERIAL NUMBER PRODUCTION WEEK & YEAR PART NUMBER
BACK VIEW
PIN OUT DIAGRAM
PIN FUNCTION 1 2 3 4 NC ANODE NC CATHODE
Figure 9. K2 Star Package Outline Drawing.
Notes for Figure 9: 1. Slots in aluminum core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum core PCB with "+" and " " to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawings not to scale. 4. All dimensions are in millimeters.
LUXEON K2 Datasheet DS51 (7/07) 17
Wavelength Characteristics Green, Cyan, Blue, Royal Blue, Red, Red Orange and Amber at Test Current Junction Temperature, TJ = 25C
Cyan Relative Spectral Power Distribution Royal Blue Blue Amber Red Green RedOrange
Wavelength (nm)
Figure 10. Relative intensity vs. wavelength.
Cool White at Test Current Junction Temperature, TJ = 25C
1.0
r Relative Specrtal Power Distribution
0.8 0.6 0.4 0.2 0.0 350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 11a. Cool White color spectrum of typical CCT part, integrated measurement.
LUXEON K2 Datasheet DS51 (7/07)
18
Wavelength Characteristics, Continued
Neutral White at Test Current Junction Temperature, TJ = 25C
SpectraRelative Spectralibution l Power Distr Power
Distribution
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Wavelength (nm )
Figure 11b. Neutral White color spectrum of typical CCT part, integrated measurement.
Warm White at Test Current Junction Temperature, TJ = 25C
SpectRelative wer DiPowerution ral PoSpectral strib
Distribution
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 11c. Warm White color spectrum of typical CCT part, integrated measurement.
Wavelength (nm )
LUXEON K2 Datasheet DS51 (7/07)
19
Typical Light Output Characteristics Over Temperature
Cool White, Neutral White and Warm White at Test Current
150% 140%
Relativ Relative e Light Output (%(%) Light Output )
White Photometric
130% 120% 110% 100% 90% 80% 70% 60% 50% -15 5 25 45 65 85 105 125 145
Junction emperature, TJ = T JunctionTTemperature, CJ (C)
Figure 12a. Relative light output vs. junction temperature for white.
Green at Test Current
150% 140%
Relative Light Output (%)
Green Photometric
130% 120% 110% 100% 90% 80% 70% 60% 50% -15 5 25 45 65 85 105 125 145 165 185
Junction emperature, TJ = T JunctionTTemperature, CJ (C)
Figure 12b. Relative light output vs. junction temperature for green.
LUXEON K2 Datasheet DS51 (7/07)
Relative Light Output (%)
20
Typical Light Output Characteristics Over Temperature, Continued
Cyan at Test Current
150% 140%
Relative Light Output (%)
Cyan Photometric
130% 120% 110% 100% 90% 80% 70% 60% 50% -15 5 25 45 65 85 105 125 145 165 185 JunctionTTemperature,T J (C) Junction emperature, TJ = C
Figure 12c. Relative light output vs. junction temperature for cyan.
Relative Light Output (%)
Blue at Test Current
150% 140%
Relative Light Output (%)
Blue Photometric
130% 120% 110% 100% 90% 80% 70% 60% 50% -15 5 25 45 65 85 105 125 145 165 185
Junction Temperature, J Junction Temperature, TJ =TC (C)
Figure 12d. Relative light output vs. junction temperature for blue.
LUXEON K2 Datasheet DS51 (7/07)
Relative Light Output (%)
21
Typical Light Output Characteristics Over Temperature, Continued
Royal Blue at Test Current
150% 140%
Relati e Ligh Output ( RelativevLightt Output%) (%)
130% 120% 110% 100% 90% 80% 70% 60% 50% -15 5 25 45 65 85
Royal Blue Radiometric
105
125
145
165
185
Junction Temperature, J Junction Temperature, TJ =T C (C)
Figure 12e. Relative light output vs. junction temperature for royal blue.
Red, Red Orange and Amber at Test Current
200% 175% Red Photometric
Relative Light Output (%) Relative Light Output (%)
150% 125% 100% 75% 50% 25% 0%
Red-Orange Photometric Amber Photometric
-20
0
20
40
60
80
o
100
120
140
Junction Temperature, T ( C) Junction Temperature, TJJ= C
Figure 13. Relative light output vs. junction temperature for red, red orange and amber.
LUXEON K2 Datasheet DS51 (7/07)
22
Typical Forward Current Characteristics Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue, Junction Temperature, TJ = 25C
1600 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 3.1
If - Forwrd Current (mA)
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
Vf - Forward Voltage (Volts)
Figure 14. Forward current vs. forward voltage for white, green, cyan, blue and royal blue.
Red, Red Orange and Amber, Junction Temperature, TJ = 25C
800
IF - Average Forward Current (mA)
700 600 500 400 300 200 100 0 -100 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8
VF - Forward Voltage (Volts)
Figure 15. Forward current vs. forward voltage for red, red orange and amber.
Notes for Figures 14 & 15: Driving these high power devices at currents less than the test conditions (350 mA or 1000 mA) may produce unpre dictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.
LUXEON K2 Datasheet DS51 (7/07)
23
Typical Relative Luminous Flux Relative Luminous Flux vs. Forward Current for Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue Junction Temperature, TJ = 25C
3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 200 400 600 800 1000 1200 1400 1600 If - Forward Current (mA)
Figure 16. Relative luminous flux or radiometric power vs. forward current for white, green, cyan, blue and royal blue at TJ = 25C maintained, test current 350 mA.
Normalized Luminous Flux
Normalized Luminous Flux
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 200 400 600 800 1000 1200 1400 1600 If - Forward Current (mA)
Figure 17. Relative luminous flux or radiometric power vs. forward current for white, green, cyan, blue and royal blue at TJ = 25C maintained, test current 1000 mA.
Notes for Figures 16 & 17: Driving these high power devices at currents less than the test conditions (350 mA or 1000 mA) may produce unpre dictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.
LUXEON K2 Datasheet DS51 (7/07) 24
Relative Luminous Flux vs. Forward Current for Red, Red Orange and Amber, Junction Temperature, TJ = 25C
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 400 500 600 700 800 If - Forward Current (mA)
Figure 18: Relative luminous flux or radiometric power vs. forward current for red, red orange and amber at TJ = 25C maintained, test current 350 mA.
Note for Figure 18: Driving these high power devices at currents less than the test conditions (350 mA or 1000 mA) may produce unpredictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.
LUXEON K2 Datasheet DS51 (7/07)
Normalized Luminous Flu Normalized Luminous Flux
25
Current Derating Curves Current Derating Curve for 350 mA Drive Current Cool White, Neutral White, Warm White
400
IF - Forward Current (mA)
350 300 250 200 150 100 50 0 50 75 100 125
o RRJ A=50C/W J-A=50 C/W RRJ A=40C/W =40oC/W J-A o RRJ A=30C/W J-A=30 C/W
150
175
TA -TAmbient Temperature (C) C) A - Ambient Temperature (
Figure 19: Maximum forward current vs. ambient temperature, based on TJMAX = 150C.
Current Derating Curve for 350 mA Drive Current Green, Cyan, Blue and Royal Blue
400
IF - Forward Current (mA)
350 300 250 200 150 100 50 0 50 75 100 125 150
RJJ-A=50oC/W R A =50 C/W
R =40 C/W RJJ-A=40C/W A
o
RJ A=30C/W
R
o J-A=30 C/W
175
200
TA TA - Ambient Temperature ( C) - Ambient Temperature (C)
Figure 20: Maximum forward current vs. ambient temperature, based on TJMAX = 185C.
LUXEON K2 Datasheet DS51 (7/07)
26
Current Derating Curve for 350 mA Drive Current Red, Red Orange and Amber
400 350 300 250 200 150 100 50 0 50 75 100 125 150 175
RJ A=50 C/W RJ A=40 C/W RJ A=30 C/W
IF - Forward Current (mA)
TA - TA - Ambient Temperature ( C) Ambient Temperature (C)
Figure 21: Maximum forward current vs. ambient temperature, based on TJMAX = 150C.
Current Derating Curve for 700 mA Drive Current Cool White, Neutral White, Warm White
800
IF - Forward Current (mA)
700 600 500 400 300 200 100 0 0 25 50 75 100 125
oC/W RRJ A=40C/W J-A=40 RRJ A=30C/W =30oC/W J-A o RRJ A=25C/W J-A=25 C/W o RRJ A=20C/W J-A=20 C/W oC/W RRJ A=5 5C/W 1 J-A=1
150
175
TA - Ambient Temperature TA - Ambient Temperature (C) ( C)
Figure 22: Maximum forward current vs. ambient temperature, based on TJMAX = 150C.
LUXEON K2 Datasheet DS51 (7/07)
27
Current Derating Curve for 700 mA Drive Current Green, Cyan, Blue and Royal Blue
800 700 600 500 400 300 200 100 0 0 25 50 75 100 125
IF - Forward Current (mA)
RJ A=50 C/W RJ A=40 C/W RJ A=30 C/W RJ A=25 C/W RJ A=20 C/W RJ A=15 C/W
150
175
200
TA - Ambient Temperature (C) C) TA - Ambient Temperature (
Figure 23: Maximum forward current vs. ambient temperature, based on TJMAX = 175C.
Current Derating Curve for 700 mA Drive Current Red, Red Orange and Amber
800
IF - Forward Current (mA)
700 600 500 400 300 200 100 0 0 25 50 75
RJ A=30 C/W RJ A=25 C/W RJ A=20 C/W RJ A=15 C/W
100
125
T A - Ambient Temperature ( C) TA - Ambient Temperature (C)
Figure 24: Maximum forward current vs. ambient temperature, based on TJMAX = 100C.
LUXEON K2 Datasheet DS51 (7/07)
28
Current Derating Curve for 1000 mA Drive Current Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue
1200 IF - Forward Current (mA) 1000 800 600 400 200 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature (C) TA - Ambient Temperature (C)
Figure 25: Maximum forward current vs. ambient temperature, based on TJMAX = 150C.
RJ A=30 C/W RJ A=25 C/W RJ A=20 C/W RJ A=15 C/W
Current Derating Curve for 1500 mA Drive Current Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue
1800 IF - Forward Current (mA) 1500 1200 900 600 300 0 0 25 50 75 100 125 150 175
RJ A=20 C/W RJ A=15 C/W
TA - TA - Ambient Temperature (C) Ambient Temperature (C)
Figure 26: Maximum forward current vs. ambient temperature, based on TJMAX = 150C.
LUXEON K2 Datasheet DS51 (7/07)
29
Typical Radiation Patterns Typical Representative Spatial Radiation Pattern for White Lambertian
100% 90% 80%
Relative Intensity (%)
70% 60% 50% 40% 30% 20% 10% 0% -100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (Degrees)
Figure 27: Typical Representative Spatial Radiation Pattern for White Lambertian.
Typical Polar Radiation Pattern for White Lambertian
0 - 30 30
- 60
60
- 90 0 20% 40% 60% 80%
90 100%
Figure 28: Typical Polar Radiation Pattern for White Lambertian.
LUXEON K2 Datasheet DS51 (7/07)
30
Typical Representative Spatial Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian
100% 90% 80%
Relative Intensity (%)
70% 60% 50% 40% 30% 20% 10% 0% -100 Typical Upper Bound Typical Lower Bound
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (Degrees)
Figure 29: Typical Representative Spatial Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian.
Typical Polar Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian
0 - 30 30
- 60
60
- 90 0 20% 40% 60% 80%
90 100%
Typical Upper Bound Typical Lower Bound
Figure 30: Typical Polar Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian.
LUXEON K2 Datasheet DS51 (7/07)
31
Typical Representative Spatial Radiation Pattern for Red, Red Orange and Amber Lambertian
100% 90% 80%
Relative Intensity (%)
70% 60% 50% 40% 30% 20% 10% 0% -100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (Degrees)
Figure 31: Typical Representative Spatial Radiation Pattern for Red, Red_Orange and Amber Lambertian.
Typical Polar Radiation Pattern for Red, Red Orange and Amber Lambertian
0 - 30 30
- 60
60
- 90 0 20% 40% 60% 80%
90 100%
Figure 32: Typical Polar Radiation Pattern for Red, Red Orange and Amber Lambertian.
LUXEON K2 Datasheet DS51 (7/07)
32
Emitter Reel Packaging
LUXEON K2 Datasheet DS51 (7/07)
33
White Binning Information
Figure 33: White Binning Structure
LUXEON K2 Datasheet DS51 (7/07)
34
LUXEON K2 Cool White Bin Structure
Figure 34: Cool White Bin Structure
LUXEON K2 Datasheet DS51 (7/07)
35
LUXEON K2 Cool White Bin Structure, Continued
Cool White LUXEON K2 Emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 10,000K to 4,500K
Table 11.
Cool White Bin Structure Typical CCT (K) 8000 Typical CCT (K) 6000
Bin Code Y0
X 0.274238 0.303051 0.307553 0.282968 0.282968 0.307553 0.311163 0.289922 0.301093 0.313617 0.314792 0.303051 0.303051 0.314792 0.316042 0.305170 0.305170 0.316042 0.317466 0.307553 0.307553 0.317466 0.319597 0.311163 0.313617 0.328636 0.328823 0.314792 0.314792 0.328823 0.329006 0.316042 0.316042 0.329006 0.329220 0.317466 0.317466 0.329220 0.329393 0.318606
Y 0.300667 0.332708 0.310778 0.283772 0.283772 0.310778 0.293192 0.270316 0.342244 0.354992 0.344438 0.332708 0.332708 0.344438 0.333222 0.322386 0.322386 0.333222 0.320438 0.310778 0.310778 0.320438 0.301303 0.293192 0.354992 0.368952 0.356917 0.344438 0.344438 0.356917 0.345092 0.333222 0.333222 0.345092 0.331331 0.320438 0.320438 0.331331 0.320211 0.310201
Bin Code WQ
X 0.318606 0.329393 0.329544 0.319597 0.328636 0.348147 0.346904 0.328823 0.328823 0.346904 0.345781 0.329006 0.329006 0.345781 0.344443 0.329220 0.329220 0.344443 0.343352 0.329393 0.348147 0.367294 0.364212 0.346904 0.346904 0.364212 0.362219 0.345781 0.345781 0.362219 0.359401 0.344443 0.344443 0.359401 0.357079 0.343352
Y 0.310201 0.320211 0.310495 0.301303 0.368952 0.385629 0.371742 0.356917 0.356917 0.371742 0.359190 0.345092 0.345092 0.359190 0.344232 0.331331 0.331331 0.344232 0.332034 0.320211 0.385629 0.400290 0.382878 0.371742 0.371742 0.382878 0.371616 0.359190 0.359190 0.371616 0.355699 0.344232 0.344232 0.355699 0.342581 0.332034
YA
8000
VM
5300
XM
6700
VN
5300
XN
6700
V0
5300
X0
6700
VP
5300
XP
6700
UM
4750
WM
6000
UN
4750
WN
6000
U0
4750
W0
6000
UP
4750
WP
6000
Note for Table 11: 1. Philips Lumileds maintains a tester tolerance of 0.005 on x, y color coordinates.
LUXEON K2 Datasheet DS51 (7/07)
36
LUXEON K2 Neutral White Bin Structure
Figure 35: Neutral White Bin Structure.
LUXEON K2 Datasheet DS51 (7/07)
37
LUXEON K2 Neutral White Bin Structure, Continued
Neutral White LUXEON K2 Emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 4,500K to 3,500K
Table 12.
Neutral White Bin Structure Typical CCT (K) 4300 Typical CCT (K) 3950
Bin Code TM
X 0.367294 0.385953 0.381106 0.364212 0.364212 0.381106 0.378264 0.362219 0.362219 0.378264 0.374075 0.359401 0.359401 0.374075 0.370582 0.357079 0.385953 0.402270 0.396279 0.381106 0.381106 0.396279 0.392368 0.378264
Y 0.400290 0.412995 0.393747 0.382878 0.382878 0.393747 0.382458 0.371616 0.371616 0.382458 0.365822 0.355699 0.355699 0.365822 0.351953 0.342581 0.412995 0.422776 0.403508 0.393747 0.393747 0.403508 0.390932 0.382458
Bin Code S0
X 0.378264 0.392368 0.387071 0.374075 0.374075 0.387071 0.382598 0.370582 0.402270 0.420940 0.414776 0.396279 0.396279 0.414776 0.408593 0.392368 0.392368 0.408593 0.402113 0.387071 0.387071 0.402113 0.396564 0.382598
Y 0.382458 0.390932 0.373899 0.365822 0.365822 0.373899 0.359515 0.351953 0.422776 0.432618 0.416097 0.403508 0.403508 0.416097 0.399525 0.390932 0.390932 0.399525 0.382156 0.373899 0.373899 0.382156 0.367284 0.359515
TN
4300
SP
3950
T0
4300
RM
3650
TP
4300
RN
3650
SM
3950
R0
3650
SN
3950
RP
3650
Note for Table 12: 1. Philips Lumileds maintains a tester tolerance of 0.005 on x, y color coordinates.
LUXEON K2 Datasheet DS51 (7/07)
38
LUXEON K2 Warm White Bin Structure
Figure 36: Warm White Bin Structure.
LUXEON K2 Datasheet DS51 (7/07)
39
LUXEON K2 Warm White Bin Structure, Continued
Warm White LUXEON K2 Emitters are tested and binned by x,y coordinates. 16 Color Bins, CCT Range 3,500K to 2,670K
Table 13.
Warm White Bin Structure Typical CCT (K)
3375
Bin Code
QM
X
0.420940 0.438458 0.431186 0.414776 0.414776 0.431186 0.423956 0.408593 0.408593 0.423956 0.416487 0.402113 0.402113 0.416487 0.409996 0.396564 0.438458 0.453820 0.445639 0.431186 0.431186 0.445639 0.437578 0.423956 0.423956 0.437578 0.429373 0.416487 0.416487 0.429373 0.422124 0.409996
Y
0.432618 0.440399 0.423386 0.416097 0.416097 0.423386 0.406472 0.399525 0.399525 0.406472 0.389001 0.382156 0.382156 0.389001 0.373814 0.367284 0.440399 0.445980 0.428680 0.423386 0.423386 0.428680 0.411632 0.406472 0.406472 0.411632 0.394281 0.389001 0.389001 0.394281 0.378952 0.373814
Bin Code
NM
X
0.453820 0.470507 0.461404 0.445639 0.445639 0.461404 0.452512 0.437578 0.437578 0.452512 0.443600 0.429373 0.429373 0.443600 0.435591 0.422124 0.470507 0.486648 0.476733 0.461404 0.461404 0.476733 0.467132 0.452512 0.452512 0.467132 0.457663 0.443600 0.443600 0.457663 0.448994 0.435591
Y
0.445980 0.450832 0.433334 0.428680 0.428680 0.433334 0.416241 0.411632 0.411632 0.416241 0.399111 0.394281 0.394281 0.399111 0.383714 0.378952 0.450832 0.454191 0.436634 0.433334 0.433334 0.436634 0.419632 0.416241 0.416241 0.419632 0.402866 0.399111 0.399111 0.402866 0.387515 0.383714
Typical CCT (K)
2950
QN
3375
NN
2950
Q0
3375
N0
2950
QP
3375
NP
2950
PM
3150
MM
2760
PN
3150
MN
2760
P0
3150
M0
2760
PP
3150
MP
2760
Note for Table 13: 1. Philips Lumileds maintains a tester tolerance of 0.005 on x, y color coordinates.
LUXEON K2 Datasheet DS51 (7/07)
40
Company Information
Philips Lumileds Lighting Company is a world class supplier of Light Emitting Diodes (LEDs) and produces billions of LEDs annually. Philips Lumileds is a fully integrated supplier producing core LED material in all three base colors (red, green, blue) and white. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands as well as production capabilities in San Jose, Penang Malaysia and Singapore. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid state LED technology and the lighting world. Philips Lumileds technologies, LEDs and systems are enabling new applications and markets in the lighting world.
www.luxeon.com www.lumiledsfuture.com
Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders.
For technical assistance or the location of your nearest sales office contact any of the following: North America:
1 888 589 3662 americas@futurelightingsolutions.com
Europe:
00 800 443 88 873
europe@futurelightingsolutions.com
Asia Pacific:
800 5864 5337 asia@futurelightingsolutions.com
(c)2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries.
Japan:
800 5864 5337 japan@futurelightingsolutions.com

▲Up To Search▲

Price & Availability of L2K2-MW14-11-BT00

	To Download L2K2-MW14-11-BT00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .